|
|
|
|
|
|
MSA FIREHAWK M7 SCBA
|
|
|
MSA FIREHAWK M7
This advanced air mask features seven life-safety design components. It is the highest quality SCBA available and is virtually bulletproof against fire ground hazard. Although lightweight and easy to use, it's a stellar performer—even in the face of extreme temperatures (up to 500°F). Protects against impact and water ingress, giving firefighters a lifesaving edge. The tetraplex shield guards against chemical warfare agent contact, too.
1. Takes The Heat
2. Fireground Management
3. Extended Protection
4. Lightweight And Easy To Use
5. Platform For The Future
6. Straight-Talk Communications
7. Virtually "Bullet-Proof" Electronics
|
|
|
|
|
|
|
|
|
|
MSA ACCOUNTABILITY SYSTEM
|
|
|
MSA ACCOUNTABILITY SYSTEM
Accountability is key to every firefighter’s safety on a fire scene. You simply can’t afford not to have the very best telemetry technology available. MSA’s Accountability System technology combines software with a high-performance radio module and the field-proven technology of MSA’s ICM® TxR Integrated PASS. Add the Accountability System to MSA’s FireHawk® M7 Air Mask, and you’ll be wearing the best integrated SCBA accountability system available. Each MSA base station can monitor up to 50 firefighters; multiple base stations can be used with a single computer. The Accountability System transmits firefighter name, team assignment, cylinder pressure, service-time remaining, PASS alarms (motion or manual), thermal alarms, battery status,radio connectivity, and evacuation acknowledgement to incident command.
|
|
|
|
|
|
|
|
|
|
MSA CLEARCOMMAND COMMUNICATIONS
|
|
|
MSA CLEARCOMMAND COMMUNICATION SYSTEM
MSA's ClearCommand Communication System is designed specifically to meet firefighters’ modern communication needs. The ClearCommand System is available in two versions: amplifier, and amplifier with radio interface, allowing firefighting teams to be properly fitted for the job at hand. Innovative design helps to reduce expenses via its shared-use amplifier, reducing individual issue equipment. ClearCommand Systems feature an internally-mounted microphone coupled with a large diameter (2”) amplifier speaker for optimal clarity and volume. Using a patented circuit design, the system delivers over twice the volume of a facepiece alone. Mounted in an out- of-the -way position, the ClearCommand System does not block vision or mechanical communication. The Ultra Elite Facepiece's mechanical voicemitter still functions fully with the system installed. The radio interface version features the same amplifier as the amp -only version, combined with an ear-speaker for incoming radio messages, and a push-to-talk assembly for interface with over 100 radio models. Also, the push-to -talk assembly features a front-mounted button for easy use inside HazMat suits, and a lapel mic for use without a facepiece.
|
|
|
|
|
|
|
|
|
|
MSA EXTENDAIRE II SYSTEM UPGRADE
|
|
|
MSA EXTENDAIRE II SYSTEM UPGRADE
MSA’s ExtendAire Systems are Emergency Breathing Supply System (EBSS) accessories that use intermediate pressure air to provide firefighters with a source of emergency breathing air. The ExtendAire system allows firefighters to quickly and easily connect to and breathe from a fellow firefighter’s air cylinder. ExtendAire Systems are tightly integrated with the SCBA to provide unrestricted mobility and easy access during critical situations. The system uses a quick connect with an integrated check valve that prevents the breathing air pathway from being contaminated by ambient air. MSA’s new ExtendAire II System offers an integrated rescue hose used with the PR14™ First-Stage Regulator that features both male and female quick-connect fittings. The system is stowed in a waist pouch that mounts on the carrier assembly and is designed to prevent snagging and accidental opening. The ExtendAire II System also connects to the ExtendAire I System for additional system flexibility.
|
|
|
|
|
|
|
|
|
|
MSA EXTENDAIRE I SYSTEM
|
|
|
MSA EXTENDAIRE I SYSTEM
MSA’s ExtendAire Systems are Emergency Breathing Supply System (EBSS) accessories that use intermediate pressure air to provide firefighters with a source of emergency breathing air. The ExtendAire system allows firefighters to quickly and easily connect to and breathe from a fellow firefighter’s air cylinder. ExtendAire Systems are tightly integrated with the SCBA to provide unrestricted mobility and easy access during critical situations. The system uses a quick connect with an integrated check valve that prevents the breathing air pathway from being contaminated by ambient air. The ExtendAire I System is integrated to the Firehawk® Second Stage Regulator’s intermediate pressure line. Coupling the system's 40-inch rescue hose between SCBA, provides both firefighters with intermediate pressure air for emergency escape.
|
|
|
|
|
|
|
|
|
|
MSA QUICK-FILL SYSTEM
|
|
|
MSA QUICK-FILL SYSTEM
The Quick-Fill System is simply a system that allows for rapid transfer of air from a high-pressure source into a cylinder containing less pressure. This air transfer is based upon one of the oldest and most fundamental laws of physics: Boyle’s Gas Law. This law demonstrates that when two gas sources of different pressures are connected, they seek to equalize at the same pressure. For example, when an air cylinder pressurized to 2000 psig is connected to an air cylinder of the same size pressurized to 1000 psig, the two cylinders will quickly equalize at 1500 psig each. The patented Quick-Fill System lets MSA Air Mask users refill and transfill air cylinders while the SCBA is worn, without removing the air cylinder - even in IDLH atmospheres.
|
|
|
|
|
|
|
|
|
|
MSA RESCUEAIRE II PORTABLE AIR-SUPPLY SYSTEM
|
|
|
MSA RESCUEAIRE II PORTABLE AIR-SUPPLY SYSTEM
MSA's RescueAire II Portable Air-Supply System provides easy-to-use, portable, and compact emergency breathing air. Designed for Rapid Intervention Teams (RITs), whose missions are to rescue downed first responders and others requiring assistance, the RescueAire II System is a lightweight and rapid solution for your team. The RescueAire II Portable Air-Supply System is compatible with all of your FireHawk MMR Air Masks, which also include the FireHawk M7 Air Mask. This feature-packed system consists of flame-and heat-resistant carrying harness with adjustable Nomex/Kevlar shoulder strap, Audi-Larm™ Audible Alarm low-pressure warning device, pressure-reducing regulator, second-stage mask-mounted regulator, 36" Quick-Fill® System EBS connection, and ExtendAire™ System EBS connection. RescueAire II Portable Air-Supply System is available in both low-pressure (2216 psig) and high-pressure (4500 psig) versions. An optional-use shoulder strap is also provided for hands-free carrying.
|
|
|
|
|
|
|
|
|
|
MSA ULTRA ELITE FACEPIECE
|
|
|
MSA ULTRA ELITE FACEPIECE
Combining state-of-the-art features with MSA's precision engineering, the Ultra Elite full-face mask is our top model in this range. The ergonomic design makes this a comfortable unit, while the 5-point harness makes it easy to put it on or take it off. The distortion-free coated lens provides a wide field of vision, while the unique airflow prevents lens misting. The face blank has a single-sealing flange and comes in rubber or silicone, while the speech diaphragm makes communication easy to discern. The model has more than 40 different versions, making it the perfect mask for many different applications.
|
|
|
|
|
|
|
|
|
|
MSA FIREHAWK M7 I-HUD RECEIVER
|
|
|
MSA FIREHAWK M7 I-HUD RECEIVER
Heads' up -- your lights are on the inside! MSA’s new M7 I-HUD Receiver for FireHawk® M7 Air Masks is worn on the INSIDE of your facepiece. Easy to install and remove – simply slide unit over nosecup to secure in place. Remove I-HUD unit with just your fingers – no tools required. Inside mount eliminates snag hazards. New LED light patterns enhance safety and security. Unit automatically syncs with SCBA upon startup. Sleek design offers 40% weight reduction compared to our external HUD. MSA's I-HUD Receiver is available only with the FireHawk M7 PASS device. The M7 I-HUD Receiver displays remaining air pressure, battery life warning, PASS device pre-alarm, and EVACUATE indicators. Other added safety features include light sensor for auto-dimming and enhanced, side-mounted buddy lights. The M7 I-HUD Receiver is always on and ready for you to see the lights.
|
|
|
|
|
|
|
|
|
|
MSA FIREHAWK M7 NIGHTFIGHTER HUD RECEIVER
|
|
|
MSA FIREHAWK M7 NIGHTFIGHTER HUD RECEIVER
Streamlined, rugged and lightweight, the Nightfighter Heads-Up Display (HUD) takes the guesswork out of the air volume remaining in your cylinder, regardless of the environment you’re in. Designed to meet and exceed NFPA 1981-2002 edition requirements for SCBA, the HUD system consists of three components that interface with MSA’s MMR Xtreme® Air Mask.
|
|
|
|
